You could use the dmesg | grep ata command here, for example.įirst, you need to install the Smartmontools on Linux Systems. Here it is particularly important to pay attention to messages beginning with ata. You can display kernel messages using dmesg. With Linux systems, messages from the kernel as well as Smartmontools provide information about a defective drive. WARNING: Normal drive names such as c:, do not work! In Linux Therefore, you will need to use the same parameters in Windows as those for Linux.īe aware of the different interfaces for devices: The path name for the types of partition also remains the same. Once you have successfully installed the tool, you can open the command prompt.Įnter the following command to check whether the program is usable:Īt the command prompt, you should now see a list of commands that you can use for smartctl.Īs smartctl behaves in exactly the same way as it does in Linux, you can use the same commands in Windows. Or, you can set the path for this program in the environment variables.

If you have not yet installed Smartmontools on your Windows Server 2008, you can download the latest version here.ĪTTENTION: During the setup you must put a check next to PATH variable. We use Smartmontools on Windows, Linux and FreeBSD. To detect damaged drives, it is advisable to use a tool for recognizing such errors.

With | grep Serial, you are able to filter the serial number of the drive from the information.

SCSI device: -a /dev/da+ OR -a /dev/pass+.

The various interfaces for devices also apply here: With the -a parameter, you can see all available information for the first assigned drive. Smartctl is a function which enables you to read drive information.

Luger serial numbers dwm properties